The Best 40Mm Cooling Fan 3D Printer Replacement

0

Nowadays, there are so many products of 40mm cooling fan 3d printer replacement in the market and you are wondering to choose a best one.You have searched for 40mm cooling fan 3d printer replacement in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings 40mm cooling fan 3d printer replacement which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

901 reviews analysed

1. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Feature

Description

Color:4pcs 3D Printer Fan 12V 0.08A

4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;

Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise

Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan

2. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

3. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

Feature

4. MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

Feature

Description

Color:2pcs Brushless DC Cooling Fan

Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.

Specification:
Model: 4010 Blower Fun
Rated Voltage: DC12V
Operation Voltage: DC7V – 12V
Consuming Current: 0.08A+5%
Consuming Power: 0.96W
Max. Air Flow: 2.8CFM
Acoustic Noise: 22dBA
Rated Speed: 7200±5%RPM
Connector: 2pin-ph2.54
DC Line Length: 300mm
Rotation Direction: Clounter-clockwise
Life Expectance: 50,000 hours at 25 degree
Size: 40x40x10mm
Screw Hole Diameter: 1.5mm

Features:
1. Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
2. Improve life
3. Lubricating
4. Not easy to make noise

Polarity Protection:
1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged)
2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.

Package Including
2 * 4010 12V 0.08A Brushless DC Cooling Fan

5. Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)

Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)

Feature

6. Shine-US 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Shine-US 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement

Feature

Description

Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;

Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise

Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan

7. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24

Feature

Description

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A

Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

8. WINSINN 40mm Blower Fan 24V 4010 Turbine Turbo 40x10mm for Cooling Creality Ender 3 / Pro Turbine Turbo 40x10mm 4010 DC Brushless Hydraulic Bearing, with Air Guide Parts – Quiet (Pack of 4Pcs)

WINSINN 40mm Blower Fan 24V 4010 Turbine Turbo 40x10mm for Cooling Creality Ender 3 / Pro Turbine Turbo 40x10mm 4010 DC Brushless Hydraulic Bearing, with Air Guide Parts - Quiet (Pack of 4Pcs)

Feature

Description

Color:Quiet – Hydraulic Bearing

Hydraulic Bearings – Quiet version

High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.

►For: Cooling Creality Ender 3 / Pro

►Size: 40x40x10mm

►Rated voltage: DC 24V

►With 2 x Air Guide Parts :))

—————————————————————————————————————

Package include:
►2 x Quiet 4010 24V Hydraulic Bearings Blower Fan
►2 x Quiet 40mm 24V Hydraulic Bearings Fan
►2 x Air Guide Parts

———————————————————————————————————————

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

9. KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

KeeYees 24V 3D Printer Brushless DC Cooling Fan 2 Pin Terminal 50mm x 50mm x 15mm 5015 and 40 x 40 x 10mm 4010 with Fan Protection Cover

Feature

Description

Specification:
Rated Voltage : DC24V 
Operation Voltage: DC10.8-13.2 
Consuming Current : 0.10A(0.12 Max.) 
Consuming Power: 1.2W(1.44 Max.) 
Connector: 2pin-ph2.5 
Rated Speed: 6200 PRM 
Iife Expectance: 50,000 hours at 25 degree 
Insulation Level: UL Class A 
Acoustic Noise: 27db
Max. Air Flow: 6.86CFM 
Rotation Direction: Clounter-clockwise 
DC Line Length : 290mm 
Size:40x40x10mm and 50x50x15mm

Product List:
2 x Cooling Fan 50x50x15mm
2 x Cooling Fan 40x40x10mm
2 x Fan Guards

KeeYees: Best choice in various Electronic Modules & Components, DIY Parts and Tools to
support your work and design challenges from Home, School to Industrial applications!

Conclusion

By our suggestions above, we hope that you can found 40Mm Cooling Fan 3D Printer Replacement for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general